{"id":454,"date":"2021-07-20T19:27:03","date_gmt":"2021-07-20T19:27:03","guid":{"rendered":"http:\/\/fenstar.co\/wp\/?p=454"},"modified":"2023-01-21T17:53:53","modified_gmt":"2023-01-21T17:53:53","slug":"custom-stair-nose","status":"publish","type":"post","link":"https:\/\/fenstar.co\/wp\/?p=454","title":{"rendered":"Custom stair nose"},"content":{"rendered":"

Unfortunately it looks like the stair nose I ordered is never coming in.<\/p>\n

Solution? Make my own!<\/p>\n

Note: Please understand how to work with things correctly. PVC contains Chlorine which is dangerous, if you don’t know this, look up proper safety stuff.<\/p>\n

\"From<\/a>

From the bottom.<\/p><\/div>\n

<\/p>\n

Because my resilient flooring (LVP) is made with a PVC backing , and PVC can be thermally formed, I thought I might be able to bend it myself. I figured the wear layer is\u00a0relatively\u00a0thin, and if it isn’t softened by heat I should be able to compress the PVC without any change to the actual surface.<\/p>\n

Of course, one of the biggest factors of bend radius is thickness, so I decided to start with routing off some of the backing.<\/p>\n

1 route it.<\/p>\n

\"Route<\/a>

Route it!<\/p><\/div>\n

Next, because I was working with a small test piece I decided to just use a grill lighter to heat it. I would suggest NOT doing this because PVC can burn. After I test bent it I found that it worked quite well.<\/p>\n

2 heat it.<\/p>\n

\"FIRE!!!!<\/a>

FIRE!!!! (For illustrative purposes only.)<\/p><\/div>\n

I set up a\u00a0little\u00a0bending\u00a0jig thing and bent it while it was still warm.<\/p>\n

3 bend it<\/p>\n

\"Bending<\/a>

Bending after heating.<\/p><\/div>\n

 <\/p>\n

Like I said, it worked pretty well and holds its shape. It is also more sturdy feeling than I expected.<\/p>\n

4 Put it on!<\/p>\n

\"Side<\/a>

Side profile. (Note that the corners are not fully supported.)<\/p><\/div>\n

\"Top<\/a>

Top appearance<\/p><\/div>\n

 <\/p>\n

The other nice thing is that, unlike most stair nose, there is no lip sticking up, you just click it in like regular flooring.<\/p>\n

 <\/p>\n

\"Click<\/a>

Click it in as normal.<\/p><\/div>\n

To make the edges a bit sturdier I filled them with bondo so that they weren’t floating in air. This is also a good way to stick it to the step because bondo will bond to the wood, but doesn’t bond to the that well. This means that the PVC is sort of fastened on with a T shape that you should be able to get the PVC off if you needed. Then you can just remove the bondo on the corners and not have to damage the wood. I should include an image to show it better later.<\/p>\n

\"Now<\/a>

Now with bondo!<\/p><\/div>\n

Moving forward:<\/p>\n